Arctic Air, HC, NON-HFC, For R1234yf, oil charge, stop leak for R1234yf

Description

Arctic Air for R1234yf, oil charge, stop leak for R1234yf, R1234 Support
Taper/Gauge, Hose Part# 3600
2 CANS OF ARCTIC AIR, 1  CAN OF OIL CHARGE, 1 CAN OF STOP LEAK R1234YF, 1 ALUMINUM GAUGE WITH A 134A CAN FITTING. GAUGE #3600.
ARCTIC AIR:
This product is a combination of 2 Enviro-Safe products into 1 for maximum cooling performance.  This will remove moisture in the A/C system.  Moisture can cause corrosion in the A/C system or the A/C to freeze up.
Please note, the top of this can has a 134a top which means you need a hose or gauge with the proper ends in order to install this product into your 1234yf vehicle. We have hoses and gauges available under these numbers: 3600 & 3610 gauges and 3635 & 3615 hoses. Please use the search bar at the bottom of the page or look in the "Gauge & Hoses" section of our site.
The other part of the product will reduce friction in system and provide colder air duct temps in most cases.
Compatible with any automotive refrigerant except ammonia and CO2
Drying agent
Colder air
Longer life
A/C Booster
DO NOT use in ammonia systems
DO NOT use in CO2 systems
Cannot be sent to Alaska or Hawaii or exported to foreign countries except in pallet quantities
Gas propelled
Installs the same way as refrigerant
Cannot be added to a fully charged system
R1234yf OIL CHARGE
A blend of selected oils that have been formulated to provide the extra oil needed when an air conditioning unit loses the oil charge due to leaks or malfunctions in the system.
For use in 1234YF systems
Use only with mineral, ester or pag oils.
Check to see if you need more oil in your system - oil checkers available on our website. They are part #:  5025a and 5030a.
DO NOT use in ammonia systems
DO NOT use in CO2 systems
Cannot be sent to Alaska or Hawaii or exported to foreign countries except in pallet quantities
Gas propelled
Installs the same way as refrigerant
Cannot be added to a fully charged system
R1234YF STOP LEAK
With age, o rings and seals will shrink and deteriorate.
When Enviro-Safe Stop Leak is added to your a/c system, it reconditions the rubber o rings and seals.
When the Stop Leak product is installed in an air conditioning system, the product mixes with the refrigerant and oil. As the product circulates in the system, it comes in contact with the o’rings and seals causing them to swell, resulting in "no leak".
Stop Leak will not repair or "fix" cuts or worn out o’rings or seals.
1 can will treat 1 vehicle.
Installing Enviro-Safe Stop Leak may stop the yearly recharge of lost refrigerant.
Use only with Mineral, Ester, and Pag oils.
DO NOT use in ammonia systems
DO NOT use in CO2 systems
Cannot be sent to Alaska or Hawaii or exported to foreign countries except in pallet quantities
Gas propelled
Installs the same way as refrigerant
Cannot be added to a fully charged system